
Concrete Form Kit for Stair Landings & Tower Foundations
Foundations & Landing Pads
Perfect for Remote Locations
A prefabricated, surface-mount form kit that turns any flat surface — including rooftops — into a code-ready foundation for ErectaStep stairs and towers. Just add concrete.
- 10-minute assembly – unbox to ready-to-pour
- No digging, no permits – surface-mountable on concrete, asphalt, or rooftop
- Non-penetrating – safe for roof membranes (roof tray sold separately)
- OSHA-compliant – meets structural stability requirements for stair landings
- In stock – flat-packed and ready to ship from the U.S.


Instant concrete form kits that are convenient and include everything needed for stair landing pads and tower foundations. Just add concrete.
Who It’s For
- Maintenance & Facilities teams needing fast, compliant access without a civil crew
- EPCs and project managers speccing landings for modular ErectaStep stairs and towers
- Rooftop and remote-site installs where digging isn’t practical or permitted
- Safety leaders upgrading temporary or non-compliant stair setups to OSHA standards
Why Choose the ErectaStep Form Kit
- Faster than site-built forms. No lumber, no custom carpentry, no rework.
- Lower total cost. Skip excavation, dig permits, and shop-fabricated pads.
- Rooftop-ready. Non-penetrating design protects membranes and warranties.
- Engineered to match. Purpose-built for ErectaStep’s modular stair system — no shimming, no adapters.
- Backed by a RAM. Your Regional Area Manager helps you spec the right kit, quantity, and configuration for the job.
Specifications
How It Works (3 steps)
- Unbox and assemble the form kit on your prepared surface — in under 10 minutes with 3 hand tools: an impact driver, a rubber mallet, and pliers.
- Pour concrete into the form using the included anchor bolt layout.
- Bolt on your ErectaStep stair or tower once the pad cures. Landing height is pre-matched to the 9″ tread rise.
| Spec | Detail |
|---|---|
| Finish height | 9″ (matches ErectaStep standard tread rise) |
| Live load | 50 psf |
| Snow load | 20 psf |
| Wind load | Up to 115 mph |
| Compatibility | Stable up to ErectaStep’s 6-step configuration |
| Installation | Surface-mount, zero penetration |
| Weight with concrete | F1 – ~1800lbs | F2 – ~785lbs |
| Anchors | Included |
| Manufactured | United States |
| Availability | In stock, ready to ship |

Capability Chart
SKU# 102316
For stairs & towers
PLATFORM SPAN
| 2′ | 3′ | 4′ | 5′ | 6′ | 7′ | 8′ | 9′ | |
|---|---|---|---|---|---|---|---|---|
| 18″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 27″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 36″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 45″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 54″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 63″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 72″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 81″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
| 90″ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 99″ | ✔ | ✔ | ✔ |
Foundation will work for any configuration combination marked


Capability Chart
SKU# 231392
For towers only
PLATFORM SPAN
| 2′ | 3′ | 4′ | 5′ | 6′ | 7′ | 8′ | 9′ | |
|---|---|---|---|---|---|---|---|---|
| 18″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 27″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 36″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 45″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
| 54″ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
| 63″ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 72″ | ✔ | ✔ | ✔ | ✔ |
Foundation will work for any configuration combination marked

Resources & Specifications
Frequently Asked Questions
It’s a prefabricated, bolt-together form for pouring stair landing pads and tower foundations. Each kit ships flat with everything needed — including anchor bolts — so a crew can assemble the form, pour concrete, and be ready for stair installation the same day.
Under 10 minutes with basic hand tools. The kit unboxes ready to place, level, and pour.
No digging is required. Because the kit is surface-mounted and non-penetrating, most sites avoid dig permits entirely. Always confirm requirements with your local Authority Having Jurisdiction (AHJ).
Yes. The zero-penetration design is rooftop-safe. Pair it with the optional rooftop tray (sold separately) to protect the roof membrane and warranty.
Yes. When installed per instructions, the pad meets OSHA structural stability requirements for stair landings. It’s engineered to support a 50 psf live load, 20 psf snow load, and wind up to 115 mph.
The finish height matches ErectaStep’s standard 9″ tread rise, and the kit is stable up to a 6-step ErectaStep configuration. For taller towers or custom builds, your Regional Area Manager (RAM) can confirm the right foundation solution.
Follow your concrete mix’s cure specification — typically 24–72 hours for foot traffic and 7 days for full design load. Your ready-mix supplier can confirm exact cure times for your climate and mix.
Yes. The Concrete Form Kit is manufactured in the United States, flat-packed, and stocked for immediate shipment. Most orders ship within 1–2 business days.
Related Items
Stairs & Work Platforms
Access Stairs, Work Platforms, Crossover Stairs, Rolling Stairs & Mobile Platforms, Roof Stairs and Access, Ship Ladder
ErectaStep ProXL
Popular configurations adjusted to the height of your project and pre-engineered to OSHA standards.
Rooftop Stair Anchor System
Rooftop Stair Counterweights provide a non-penetrating anchoring solution for rooftop stairs and crossover platforms
What Customers Are Saying
We love the quality of materials and ease of assembly. My stairs were delivered in record time only because of the outstanding service provided by Tony TD” Dublino and the office staff helping me along the way!"
By Dennis A. from Flintlock Construction Services, LLC
Easily assembled in the field and fit like a glove. The engineering for these products is already completed and the OSHA regulations are fully understood by the company, if not I may have developed these stairs through other resources. As a shareholder of the company this is a value engineered item at a feasible cost to the company.
By Bill K. from Marathon Petroleum Corporation
Single Railroad Wheel Chock Flush SafeRack provided great communication and follow up from all parties.
By NK G. from Marathon Pipe Line LLC
Very responsive. The representative got back to me immediately. We needed an A-1 chock for a railcar. We are very happy with the product, it works very well!
By Larry D. from United Feed Co-Op Inc.
Quality!!!!! The MAUI was shipped & delivered on time. SafeRack was extremely responsive. I would absolutely recommend this product. Best portable fall protection in the business.
By Buddy S. from Brenntag NE
All groups communicated deliverables and shipping date well. All groups communicated deliverables and shipping date well.
By Jeff R. from NGL Energy Partners LP
Projects & Installations









